Analysis of the Performance Evaluation Study of Generator Excitation Unit in Atik Bakery Factory
Abstract
Atik Bakery uses a power generation system to meet its operational energy needs, one of which comes from a generator unit that plays an important role in maintaining a stable power supply. One of the key components in generator operation is the excitation system that functions to regulate the generator output voltage. This study aims to evaluate the performance of the generator unit excitation system at Atik Bakery, by analyzing efficiency, voltage stability, and response to changes in load. The methods used include measuring the generator output voltage at various load conditions, as well as monitoring the parameters of the excitation system using measuring devices and data analysis. The results of the study indicate that the generator unit excitation system can maintain a stable output voltage under normal load conditions, but there is a decrease in performance at higher loads, which can affect the quality of power supply to the factory. This evaluation provides a basis for efforts to improve and enhance the performance of the excitation system to improve operational efficiency and stability at Atik Bakery.
Downloads
References
Arigayota, Abdul Rahman, “Monitoring Transformer Oil Quality”. Technology and Energy Vol.2 No.4: Page 392, October 2012. \
Aryza, S., Efendi, S., & Sihombing, P. (2024). A ROBUST OPTIMIZATION TO DYNAMIC SUPPLIER DECISIONS AND SUPPLY ALLOCATION PROBLEMS IN THE MULTI-RETAIL INDUSTRY.Eastern-European Journal of Enterprise Technologies, (3).
Aryza, S., Lubis, Z., & Putra, K. (2025). A Smart IoT Approach to Optimize Electric Circuit Breaker Reliability and Functionality.INFOCUM,13(03), 686-697.
Chapman, Stephen. J., “Electric Machinary Fundamentals: Fourth Edition”, McGraw-Hill Education, New York, Ch. 2, 2005.
Febrina, Dewi Cahya, Final Project, “The Effect of Temperature on Breakdown Voltage and Working Life of Various Types of Transformer Oil at PT.PLN (Persero) P3B JB APP - Surabaya”, Power System Engineering Study Field, Electrical Engineering Department, ITS, 2016.
F. Husnayain, M. Latif, O, and I. Garniwa, "Transformer Oil Lifetime Prediction Using the Arrhenius Law based on Physical and Electrical Characteristics", IEEE 2015 International Conference on Quality in Research, pp. 115 – 120, Aug, 2015.
International Electrotechnical Commission. “Mineral insulating oils in electrical equipment – Supervision and maintenance guidance”, IEC 60422 Ed.4 2013-01, Jan 2013.
Institute of Electrical and Electronics Engineers. “IEEE Guide for the Statistical Analysis of Thermal Life Test Data”, ANSI/IEEE Std. 101-1987. New York, Dec 2010.
olikhudin, M., “Study of Interbus Transformer (IBT-1) 500/150 kV Disturbance in Gitet 500 kV Kembangan – West Jakarta”, Thesis, Faculty of Engineering, Postgraduate Program, Department of Electrical Engineering, UI, Chapter 2, 2010.
Pasaribu YAG et al (2024)A Comparative Analysis Of Linear And Nonlinear Loads On The Performance Of Three-Phase Synchronous Generators. Scientia Journal, 13(03), 1175-1186.
Ramadhan, M,et al (2025) Analysis of Solar Power System Planning For Street Lighting SUPPLY at Campus I Panca Budi Development University Medan. INFOKUM, 13(04), 918-928.
Tharo, Z., Kusuma, BS, Anisah, S., & Dhalimunte, ME (2021). COMPARATIVE ANALYSIS OF PREPAID AND POSTPAID KWH METER PERFORMANCE.Proceedings of the National Conference on Social & Engineering Polmed (CONCEPT),2(1), 358-365.
Satria, B., Rahmaniar, R., & Dalimunthe, ME (2024). An Implementation of IoT Weather Station Based on ESP 32.Scientia Journal,13(04), 1453-1460.
