SIMULATION CONTROL SYSTEM DESIGN WITH SCILAB AND XCOS
SIMULATION CONTROL SYSTEM DESIGN WITH SCILAB AND XCOS
Keywords:
Control System, Scilab, Xcos
Abstract
The control system is designed to facilitate the performance of an electronics design. Design on Sclib for work simulation in the form of block diagrams with Xcos features. The input must match the connected component variables based on the mathematical formula. The design stages in this research are P, I, D control and DC motor. Modeling on analog, physical and system design modeling with simulation outputs on control system design block diagrams. The application of Sclib to Xcos features helps in learning electronics, electrical and simulation system design.
Downloads
Download data is not yet available.
References
[1] K. Ogata, Teknik Kontrol Automatik, 1st ed. Jakarta: Erlanga, 1995.
[2] K. Sailan, “DC Motor Angular Position Control using PID Controller for the porpuse of controlling the Hydraulic Pump,” Int. Conf. Control. Eng. Inf. Technol., vol. 1, pp. 22–26, 2013.
[3] K. Anam, “Implementasi Metode Numerik Pada Rangkaian Listrik Menggunakan Scilab,” J. Penelit., vol. 5, no. 1, pp. 59–67, 2020, doi: 10.46491/jp.v5e1.487.59-67.
[4] K. M. A. Kosasih, H. Suzuki, H. Niizato, and S. Okubo, “Demonstration experiment and numerical simulation analysis of full-scale barge-type floating offshore wind turbine,” J. Mar. Sci. Eng., vol. 8, no. 11, pp. 1–15, 2020, doi: 10.3390/jmse8110880.
[5] W. Waluyo, A. Fitriansyah, and S. Syahrial, “Analisis Penalaan Kontrol PID pada Simulasi Kendali Kecepatan Putaran Motor DC Berbeban menggunakan Metode Heuristik,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 1, no. 2, p. 79, 2013, doi: 10.26760/elkomika.v1i2.79.
[6] S. Skogestad, “Probably the best simple PID tuning rules in the world,” vol. 1, no. 1, pp. 1–64, 1967, [Online]. Available: http://www.nutricion.org/publicaciones/pdf/prejuicios_y_verdades_sobre_grasas.pdf%0Ahttps://www.colesterolfamiliar.org/formacion/guia.pdf%0Ahttps://www.colesterolfamiliar.org/wp-content/uploads/2015/05/guia.pdf.
[7] F. A. Alamsyah, “Penggunaan xcos sebagai alternatif perangkat lunak berbayar untuk simulasi sistem massa-pegas-peredam,” vol. 18, no. 2, pp. 95–100, 2018, [Online]. Available: file:///C:/Users/US/Downloads/6346-14160-2-PB (1).pdf.
[8] N. Arfinanti, “Pengembangan Media Pembelajaran Matakuliah Metode Numerik dengan Implementasi Scilab Berbantuan Software Latex,” Al-Khwarizmi J. Pendidik. Mat. dan Ilmu Pengetah. Alam, vol. 6, no. 2, pp. 121–138, 2018, doi: 10.24256/jpmipa.v6i2.370.
[9] M. Hidaayat, “Eksperimen Akuisisi Data Sederhana untuk Pembelajaran Fisika,” 2015, pp. 55–65, [Online]. Available: http://fmipa.um.ac.id/wp-content/uploads/Prosiding2015/Model-Pembelajaran/Fisika2015_02-Model-Mirjanur.pdf.
[10] S. Adnan and R. Anugrahwaty, “Implementasi Metode Eliminasi Gauss Pada Rangkaian Listrik Menggunakan Matlab Software,” JITEKH (Jurnal Ilm. Teknol. Harapan), vol. 6, no. 01, pp. 30–35, 2017, [Online]. Available: http://ejournal.stth-medan.ac.id/index.php/Jitekh/article/view/11.
[11] C.-T. Chen, “Analog & Digital Control Systems Design Transfer-function, State-space, & Algebraic Methods.” Hacourt Brace Jovanovich Collage, Newyork, pp. 551–563, 1993, [Online]. Available: https://gctjaipur.files.wordpress.com/2015/08/analog-and-digital-control-system-design.pdf.
[12] Izadian, “Fundamental of Modern Electric Circuit Analysis and Filter Synthesis,” in Springer Nature Switzerland AG, 1st ed., Switzerland: Springer Nature Switzerland AG, 2019, pp. 1–515.
[2] K. Sailan, “DC Motor Angular Position Control using PID Controller for the porpuse of controlling the Hydraulic Pump,” Int. Conf. Control. Eng. Inf. Technol., vol. 1, pp. 22–26, 2013.
[3] K. Anam, “Implementasi Metode Numerik Pada Rangkaian Listrik Menggunakan Scilab,” J. Penelit., vol. 5, no. 1, pp. 59–67, 2020, doi: 10.46491/jp.v5e1.487.59-67.
[4] K. M. A. Kosasih, H. Suzuki, H. Niizato, and S. Okubo, “Demonstration experiment and numerical simulation analysis of full-scale barge-type floating offshore wind turbine,” J. Mar. Sci. Eng., vol. 8, no. 11, pp. 1–15, 2020, doi: 10.3390/jmse8110880.
[5] W. Waluyo, A. Fitriansyah, and S. Syahrial, “Analisis Penalaan Kontrol PID pada Simulasi Kendali Kecepatan Putaran Motor DC Berbeban menggunakan Metode Heuristik,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 1, no. 2, p. 79, 2013, doi: 10.26760/elkomika.v1i2.79.
[6] S. Skogestad, “Probably the best simple PID tuning rules in the world,” vol. 1, no. 1, pp. 1–64, 1967, [Online]. Available: http://www.nutricion.org/publicaciones/pdf/prejuicios_y_verdades_sobre_grasas.pdf%0Ahttps://www.colesterolfamiliar.org/formacion/guia.pdf%0Ahttps://www.colesterolfamiliar.org/wp-content/uploads/2015/05/guia.pdf.
[7] F. A. Alamsyah, “Penggunaan xcos sebagai alternatif perangkat lunak berbayar untuk simulasi sistem massa-pegas-peredam,” vol. 18, no. 2, pp. 95–100, 2018, [Online]. Available: file:///C:/Users/US/Downloads/6346-14160-2-PB (1).pdf.
[8] N. Arfinanti, “Pengembangan Media Pembelajaran Matakuliah Metode Numerik dengan Implementasi Scilab Berbantuan Software Latex,” Al-Khwarizmi J. Pendidik. Mat. dan Ilmu Pengetah. Alam, vol. 6, no. 2, pp. 121–138, 2018, doi: 10.24256/jpmipa.v6i2.370.
[9] M. Hidaayat, “Eksperimen Akuisisi Data Sederhana untuk Pembelajaran Fisika,” 2015, pp. 55–65, [Online]. Available: http://fmipa.um.ac.id/wp-content/uploads/Prosiding2015/Model-Pembelajaran/Fisika2015_02-Model-Mirjanur.pdf.
[10] S. Adnan and R. Anugrahwaty, “Implementasi Metode Eliminasi Gauss Pada Rangkaian Listrik Menggunakan Matlab Software,” JITEKH (Jurnal Ilm. Teknol. Harapan), vol. 6, no. 01, pp. 30–35, 2017, [Online]. Available: http://ejournal.stth-medan.ac.id/index.php/Jitekh/article/view/11.
[11] C.-T. Chen, “Analog & Digital Control Systems Design Transfer-function, State-space, & Algebraic Methods.” Hacourt Brace Jovanovich Collage, Newyork, pp. 551–563, 1993, [Online]. Available: https://gctjaipur.files.wordpress.com/2015/08/analog-and-digital-control-system-design.pdf.
[12] Izadian, “Fundamental of Modern Electric Circuit Analysis and Filter Synthesis,” in Springer Nature Switzerland AG, 1st ed., Switzerland: Springer Nature Switzerland AG, 2019, pp. 1–515.
Published
2021-12-13
How to Cite
Ikhsan Parinduri, & Panjaitan, M. (2021). SIMULATION CONTROL SYSTEM DESIGN WITH SCILAB AND XCOS: SIMULATION CONTROL SYSTEM DESIGN WITH SCILAB AND XCOS. INFOKUM, 10(1), 223-227. Retrieved from http://seaninstitute.org/infor/index.php/infokum/article/view/242
Section
Articles
